If you've ever been interested in buying some pore strips to get all the dirt and oil that is clogging the pores on your nose, you've probably seen that the Biore pore strips run for about 7-10 bucks. Well, here's a recipe for you very own homemade pore strips that you can use not only on your nose, but anywhere on your face! The best part? Its cheap and there are only two ingredients!
What you'll need:
a small container for mixing ingredients
1 1/2 - 2 tablespoons milk (any kind)
1 tablespoon unflavored gelatin
spoon to mix
popsicle stick,old brush, or q-tip to apply on face
Step 1: Mix Ingredients
Place 1 1/2 - 2 tablespoons of milk and 1 tablespoon of gelatin power in your small container. Mix the ingredients together until the mixture has a thick, chunky texture.
Step 2: Heat it Up
Place the mixture in the microwave for 10-15 seconds. When you take it out the mixture should look creamy. Let it cool down a bit before you put it on your face so you do not burn yourself, but be sure not to wait too long because it hardens quickly.
Step 3: Apply to Face
After the mixture cools down and you feel it is safe to apply it to your cleaned face, dip your popsicle stick/brush/q-tip in the mixture and apply a thin layer to the area. Be sure to work quickly before it hardens. Let it dry on your face for 10-15 minutes or until it is completely dry and hard.
Step 4: Peel!
This is the fun part. Gently peel the DIY pore strip off your face and see all the gunk your just cleared from your pores!
Keine Kommentare:
Kommentar veröffentlichen